When replacing the oil pan gaskets, it's a good idea to consider replacing the end seals with neoprene seals as opposed to the original cork. Fits 948/1098/1275 engines, you can select front, rear, or both.
NOTE: There are two different lengths of sump seal. The front one is shorter than the rear one, so be sure you have the right seal in the right place!
NOTE 2: We have encountered the rare occasion where one of these seals is too long for the groove. In this instance, you may need to trim the seal to fit the gap properly. Leave just shy of 1/8" protruding above the base of the lip for the side gasket to seat onto and compress to ensure a tight seal. Don't leave too much or you can damage the seal upon tightening or even damage the oil pan! Don't cut it too short or it will leak! See pictures for proper fitment.
